![]() Type in exit and press Return and you’ll end up at the UEFI menu:.If you missed it and end up with a screen looking like this: Quickly press F2 on your keyboard to get to the UEFI menu. Plug the 5V power supply into an outlet.Now that the board is set up, we’re ready to turn it on and start the boot and OS installation. 4 Boot the board from the USB flash drive.Plug the microSD card into the microSD card slot (insert the microSD card with the connectors up).Plug the USB flash drive with the Ubuntu image you just created into the bottom USB connector.Connect the 5v power connector to the board, but not into the wall outlet just yet.Plug the Ethernet cable into your network port and into the MinnowBoard Turbot Ethernet jack.(While not required, it’s easier to install Ubuntu with a mouse.) Connect a USB hub to the top USB connector on the MinnowBoard Turbot, and then connect the keyboard and mouse into the hub. Connect a USB keyboard to the top USB connector.Connect a microHDMI cable from the board to your monitor (and turn the monitor on).As we did for powering up the board, you’ll need to: Now you can proceed to set up the MinnowBoard Turbot. Best Practice: Windows USB Flash Drive Initialization.While it’s tempting to just copy the image to the USB flash drive, this won’t create the needed boot image structure on the USB flash drive, so please follow one of these suggested steps. The step to create a bootable Ubuntu image on the USB drive is a bit different depending on the OS your host computer is running. This is a large download (~ 1.5GB) and may take a while to download depending on your Internet speed. This ISO image is in a special format used to create a bootable image on the USB flash drive (in the next step). 1 Download Ubuntu 16.04.3 (LTS) desktop imageĭownload an ISO image of Ubuntu 16.04.3 LTS desktop from the Ubuntu website.Used to download the OS image and write to the USB flash drive. Used to perform software updates and download the additional packages not provided with the base operating system.Ĭan run Windows, Linux, or OS X. If you install an OS with a graphical user interface, a USB mouse is handy to have. Typically required during OS installation. MicroHDMI male (plugs into the MinnowBoard Turbot) to HDMI male (plugs into your monitor–select a cable compatible with both). Used to store the OS which the system will run from. Essentials Hardware componentsĥV 2.5A minimum (4A recommended), 5.5 x 2.1mm barrel connector, center positive.Ĭlass 10 16GB+ or larger recommended. It only takes a few steps to use your own computer to download an OS image, create a bootable USB flash drive, and install that image on a microSD card on the MinnowBoard Turbot. The Turbot does not come with an OS pre-installed. Once installed, you can use regular Linux commands and programs to explore and develop applications using the MinnowBoard Turbot and connected devices. This tutorial explains how to install a popular Linux release, Ubuntu 16.04.3 LTS. Despite its small size, the MinnowBoard Turbot can run desktop PC versions of operating systems such as Linux* and Windows*.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |